Call Today

 

 

Are you currently trying to find guidance about How to Troubleshoot and Repair an Electric Water Heater?

Lots of modern homes take advantage of an electric water heater for their furnace, because of its ease as well as ease of use. Nonetheless, much like any other electrical devices, issues may emerge with its usage, unexpectedly. It can be truly aggravating to awaken to a chilly shower instead of a hot one or having your bath with water that isn't warm enough and even too warm. Whatever the case might be, water heater troubles can be quite aggravating. Thankfully, we have actually made a listing of feasible options to your water heater problems. There are a number of aspects that could trigger many of these issues, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for security. Whatever the problem is, getting it taken care of should not position way too much of a problem if you adhere to these steps:

 

Inspect Your Power Supply:

As standard as this may appear, it is really required. Without ample power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power problem. Examine if the fuse is burnt out or the breaker tripped. If the breaker is the problem, merely turn it off and on once again. Change any kind of broken or damaged fuse. Examine the device with power after these adjustments to see if it's now working.

 

Inspect the Burner in the Water Heater:

If it's not a power problem, after that attempt checking out your heating element if it is still working. Check each of your burner to be sure the issue isn't with any one of them. If any one of them is damaged, replace that part and after that examine whether the warm water is back on.

 

Examine Your Thermostat:

If your water heater still isn't working or the water coming out isn't warm sufficient, you might need to check the temperature setups on your top thermostat. Make certain the breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature level reset over the thermostat. This need to aid heat the water. Turn the circuit breaker back on and inspect if the issue has actually been solved.

 

Call A Specialist:

If after replacing all defective parts as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to call a specialist plumber for a specialist point of view. The trouble with your heating system could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water needed in your home. Whatever the situation may be, a professional plumber would help solve the problem.

 

Verdict

Hot water heater issues are not always major. A lot of them are due to minor concerns like a blown fuse or damaged burner. Changing the defective parts should suffice. Nonetheless, if you are still incapable to fix the issue, give a call to your closest plumber to come to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I ran across that piece of writing on No Hot Water — Water Heater Repair when doing a search on the search engines. Sharing is caring. Helping people is fun. Kudos for your time. Don't forget to come by our site back soon.

Schedule Estimate